BMG Single Steal Deal, 3/4-inch AR500 steel, surface rust, three 9/16-inch square mounting holes per target

BMG Single Steal Deal – 11×8″ Plate

$58.00
Sale price  $58.00 Regular price 
Skip to product information
Free Shipping*
BMG Single Steal Deal, 3/4-inch AR500 steel, surface rust, three 9/16-inch square mounting holes per target

BMG Single Steal Deal – 11×8″ Plate

$58.00
Sale price  $58.00 Regular price 
🚚FREE shipping on orders $99+* — flat rate under $99

Specs

Size
11″ × 8″
Steel
3/4″ AR500, mill certified
Weight
19.0 lb
Mounting holes
3 × 9/16″ square (2 top corners, 1 center)
Hanger & hardware
Sold separately — see T-post hangers
Finish
Factory red-oxide mill primer
Rated for
.50 BMG and magnum rifle, long range only

The BMG Single Steal Deal. A compact 11×8″ slab of 3/4″ AR500 rated for .50 BMG and magnum rifle, Surface Rust finish (factory red-oxide mill primer). ~19 lb of big-bore-rated steel for $58 — compare the delivered price per pound to anyone quoting .50-rated plate. Made in the USA.

  • 11″ × 8″ × 3/4″ AR500 · ~19 lb
  • 3 × 9/16″ square mounting holes (2 top corners, 1 center)

About the “Surface Rust” name: this line ships in the steel mill’s factory red-oxide primer — the reddish-brown protective coat the plate comes with from the mill — instead of our painted finish. The finish has no effect on hardness or rating.

⚠ .50 BMG / magnum safety: greater minimum distances than standard rifle — long-range only, confirm a safe distance for your caliber. Never armor-piercing, incendiary, steel-core, or green-tip ammo. Eye protection required. Use at your own risk.

Questions & answers

What size is it, and how much does it weigh?

11″ × 8″, about 19 lb, in 3/4″ mill-certified AR500 steel.

How far away do I need to be?

Big Bore targets are long-range only: at least 300 yards for lead-core, copper-jacketed .50 BMG and brass solids, and at least 400 yards for brass solids in .416 Barrett and .408 CheyTac. Those are minimums: confirm a safe distance for your caliber and velocity, and when in doubt, shoot farther. Big-bore hits wear steel faster than smaller calibers, so inspect the plate after every string.

What calibers is it rated for?

It's 3/4″ AR500, half again as thick as our standard 1/2″ line, built for .50 BMG, .416 Barrett, .408 CheyTac and other high-power rifles at long range.

What ammo should I never shoot at it?

Never armor-piercing (AP), API/incendiary, tracer, SLAP or steel-core .50 BMG; a single round can crater the plate. Never steel-core, armor-piercing, bi-metal jacket, incendiary or green-tip (M855/SS109) ammunition. These damage the plate and can ricochet whole instead of breaking up. Run a magnet over surplus ammo first: anything magnetic stays off steel.

How should I hang it?

Mounting holes: 3 × 9/16″ square (2 top corners, 1 center). Big Bore plates are heavy (this one is about 19 lb), so hang it from rated chain or hangers on a stand built to take the swing. Never lean a big-bore plate against a rock, post or berm.

What does “Surface Rust” mean?

It ships in the steel mill's factory red-oxide primer, the reddish-brown protective coat the plate comes with from the mill, instead of our paint. It's the same steel with the same rating; the finish has no effect on hardness, and paint or primer only lasts until the first shot anyway.

When should I retire it?

Inspect it before every session and after every string. Retire any plate with craters, pitting or deep gouges, or one that has been hit with the wrong ammo even once: damaged steel deflects unpredictably.

Is it made in the USA?

Yes. Every target starts as American mill-certified AR500 plate and is deburred by hand and finished in an American fab shop.

How much is shipping?

A flat $12.95 per order in the lower 48 states, and free on orders of $99 or more. Alaska, Hawaii and U.S. territory orders ship at the rate shown at checkout. We ship only within the United States.

Can I return it?

Unused, unfired targets can be returned within 30 days of delivery for a refund of the purchase price; you pay return shipping. Targets that have been shot can't be returned. If your order arrives damaged, email photos within 48 hours of delivery and we'll replace or refund it.

Full rules on our steel target safety page. Shooting steel is inherently dangerous; use at your own risk.

American MadeFamily-owned, USA-made
True 3/4″ AR500Mill-certified plate
Fast DispatchShips in 5–7 business days
Free Shipping $99+*Free replacement if it arrives damaged

You may also like